NCR P1535, Руководство пользователя

Страница: 32 / 60

Installation Notes and Restrictions 2-23
Connecting AC Power
1. Connect the Power Supply cable to the DC Power connector on the terminal.
2. Connect the AC Power Cord to the Power Supply and to an AC outlet.
Disconnecting the Power Cable
The Power Cable connector locks into position when connected to the terminal and
cannot be removed by simply pulling on the cable. To remove it you must slide the
outside housing out from the terminal to unlock it and then pull it out of the terminal
connector.
Connecting to a Network
Most business configurations require you to connect your P1535 system to a network.
Connecting to a network enables you to communicate with other systems and devices
also on the network, and depending on your business' configuration, may allow you to
connect to the Internet.
To connect the P1535 terminal to a network, plug the 10/100/1000 Ethernet cable into the
port labeled NETWORK on the bottom panel. The other end of the 10/100/1000 Ethernet
cable should be connected into your network hub.
Note:
You may need to consult with your business' IT (information technology)
representative to determine whether you have a network connection available, and to
locate the network hub to connect to your P1535.
Starting Up the P1535 Terminal
In order to run your operating system and access your software and data, you must start
up the P1535 platform. To start up the P1535, complete the following procedure:
1. Simply plug the power cord into an electrical outlet. The system automatically turns
on once plugged into the outlet.
The system installs the system devices, system settings, and then reboots to continue
setup. Complete the System Setup. This varies from OS to OS but the following is
typical.
2. The initial setup procedures are performed.
• Starting Windows
• Preparing the computer for the first time
• Checking video performance
3. Accept the License Terms .
Note:
Depending on your installed operating system and your selected settings, your
system will vary in the amount of time it takes to boot up.