Tri-Light (7709)
5
10. Connect the cables to the I/O Adapter.
Connector
Device/Cable
USB A
Handheld Scanner
TRILIGHT
Tri-Light/Lane Light Extender Cable
Note:
In place of the Indicator Light Cable, connect the
extender cable that is included in the 7709-K801 Tri-light
kit.
CAB/TAB/CKPT
Checkpoint Signal Cable
CPN SENSOR
Coupon Sensor Cable
KEYLOCK
Supervisor Switch
PROXIMITY/SENSORS
Turntable Kit
24V IN
Power Supply 2-pin Connector
Note:
This connector is not connected to the I/O Adapter
if the NCR 7709 unit is using the Indicator Light.
11. Route the Tri-Light/Lane Light Extender Cable from the I/O Adapter to the top of
the Tri-Light/Lane Light Pole. For more information, refer to