Tri-Light (7709)
3
Installation Procedure
To install the Tri-Light kit, follow these steps:
1. Shutdown and power off the terminal.
2. Disconnect the Kiosk AC Power Cable from the outlet.
3. To open the kiosk, insert the key into the lock at the right-hand side of the kiosk,
turn the key clockwise, and carefully open the front of the kiosk.
Caution:
Do NOT abruptly open and release the front of the kiosk. Hold and
support the front of the kiosk until fully extended.
4. Remove the Power Supply Unit. For more information, refer to
5. Disconnect all cables from the I/O Adapter.
6. Remove the I/O Adapter from its bracket. For more information, refer to
