![background image](http://html2.mh-extra.com/html/ncr/5945/5945_user-manual_3729157022.webp)
2-10
Chapter 2: Installing the NCR 5945
Disconnecting the 5945 Connector
1.
Gently pull the cable up from the "
L"
shaped cable guide retention
tabs.
2.
Hold the connector behind the cover, and gently pull the connector
out of the 5945 port.
Connecting the 5945 with a Power Supply
The following illustration shows the steps needed to connect the 5945
to a host device, (PC or cash register) with a power supply.
1.
Turn Off Power to your host device (PC or cash register).
2.
Plug the 5945 Host Connector into the pre-determined port on
your host device.
3.
Plug the 5945 Port Connector (MiniDIN 9) into the port on the
bottom of the 5945 unit, and route the cable through the
L
shaped
guide.
4.
Plug the DC Power Supply into a standard wall outlet.
Warning:
Use only the DC Power Supply shipped with your unit.
Using any other power supply may damage the 5945
and will void the warranty.
5.
Plug the Power Supply Connector into the Power Supply Jack on
the cable.
6.
Once the 5945 has power and the PC or register is signed on, it is
ready for use as determined by your 5945 application software.
Содержание 5945
