NComputing N-series User Manual rev11.09.12
Page
11
of
25
2.1 The XenDesktop Tab
The XenDesktop tab is used to point your N-series device to your XenDesktop Services Site as well as
configure certain application behaviors.
Auto-configure (DHCP)* –
Instructs the N-series device to obtain XenDesktop Services
Site information automatically via DHCP (requires that you configure your DHCP server to
distribute this information).
Name/URL –
Use this field if you wish to manually enter the IP, URL, or Fully Qualified
Domain Name of your XenDesktop Services Site.
Use Citrix Access Gateway –
Enabling this feature will allow your N-series device to
access your Citrix environment securely from outside your network via the Citrix Access
Gateway.
Auto-launch if only one application is published
– If your XenDesktop
environment is configured to only publish a single application to the user session obtained by a
given device, you can use this feature to automatically launch that application on login.
Auto-logoff on last application quit
– Enabling this feature will cause your N-series
device to automatically log out if all applications are closed.
*Note:
You can configure your DHCP server to automatically provide your N-series device(s) with
XenDesktop server information. This eliminates the need for you to manually configure this setting for
each device. Review section
4.2 DHCP Options for Automatic N-series Configuration
for more
information.
