NCM
PARIS MAX 36V
OVERVIEW OF THE ELECTRONIC PARTS
ATTENTION: (
Sticker on battery)
● Do not use or charge the battery in high temperature.
● Do not short-circuit the positive (+) and negative (-) connectors of the battery.
● Do not immerse the battery in water or acidic liquid. Do not place the battery near fire.
● Do not disassemble the battery under any circumstances.
● Store the battery in a clean and dry environment, and charge the battery for two hours every three months when it will not be used for a long time.
● Charge the battery with the specified charger.
D
B
C
An AC plug (100 ~ 240V) (type will vary) B Charger
C Charge indicator D Battery
plug
TO
4.2.2 General remarks
● Stop charging the battery immediately if you notice anything unusual, such as smoke or a strange smell, remove the battery and store it outside the house,
then take the battery to an authorized NCM dealer or an experienced technician for repair or replacement.
● In the unlikely event that the battery catches fire, DO NOT attempt to extinguish it with water. Use sand or other fire retardant instead and call emergency
services immediately.
4.2.3 Battery Installation and Removal
The battery (1) is secured with a lock.
- Unlock the battery and pull it out with the handle (2).
- Insert the battery (1) into the frame until it stops.
- Remove the key from the lock (3).
- Make sure the battery is well secured.
one
one
3
4.2.4 Loading
● Charging in temperatures below 0 ° C or above 60 ° C may cause the battery to not charge properly and may be harmful to battery life.
● During charging, the charger LED light will be continuously red.
● When charging is complete the LED on the charger turns green.
fifteen
