11
User Definable Transmitted Bytes
8 bytes in the Notification packet are definable by the user. These bytes can be
used in any way required by the user. Configuration of these bytes is done using
Base Station as follows:
Step 1:
Open Base Station; Select the Network Radio button on the Select
Connection window. Enter the IP address of the WiFi module in the IP address
text field. Enter the Port defined as the TCP Listener port I the WiFi module (by
default this is set to 2101). Then click the OK button below.
Step 2:
Base Station will communicate to the controller and display a window
with control software options. Select Scratchpad Memory Command Set.
Step 3:
A new window will appear with 8 byte positions. The user may change
any of the 8 bytes as required.
Step 4:
After configuration is complete click the Store Above Data into
Scratchpad Memory to store the changes into the controller.
