6
Step 4: Module Setup
1.
Connect the KFX module to a computer using the ZIGMO USB adapter
(shown right).
2.
Download and install Base Station software:
http://assets.controlanything.com/Software/NCDBaseStation.zip
3.
When the “Select Connection”
window opens, choose the COM port
associated with the ZIGMO.
4.
Press “OK” when finished.
5.
In the next window, under the
command sets offered, select “KFX
Series Configuration Control Panel”.
This should open the Key Fob
Receiver Configuration window.
From here users are able to customize
command sets to fit their application needs.
