5
Step 3: Pairing Key Fob with KFX Receiver
Each KFX Receiver can be paired with up to 40 key fobs. Please note that every Key
Fob will perform the exact same function, as it is not possible for each Key Fob to send
different data.
This process is outlined below:
Step
1
:
On the KFX module, push the
button labeled LEARN.
A Red LED will flash for 15 seconds.
The following step must be
completed before the LED stops
flashing.
Step
2
:
Press Every Button on the Key Fob
that you want the KFX module to
use.
Step
3
:
Press the LEARN button again to store your settings, or wait for the LED
to stop flashing.
Hint: Hold Down the LEARN button on the KFX module for 10 seconds to erase all
paired Key Fobs from memory.
