
8
Changing the Surface Mounted Joystick:
Switch off the transmitter and remove the batteries.
Loosen all 4 screws of the Surface Mounted
Joystick with a Torx 10 screwdriver and
remove the screws.
Remove the Surface Mounted
Joystick from the top.
Insert the new Surface Mounted Joystick and make sure that the plugs and sockets
are above each other. Screw down the Surface Mounted Joystick with the 4 screws
previously removed and reinsert the batteries.
Start teach mode after changing the Surface Mounted Joystick.
Surface Mounted Joystick teach mode activation with pushbutton:
n
1.
2.
3.
4. .
5.
6.
7.
n
Technology SMJ - Surface Mounted Joystick
1
6
4
2
5
5
3
To activate teach mode, the transmitter must be switched off.
Press and hold the
«Frequency switching»
key.
Switch the transmitter on.
The letters
«Jt»
appear in the display after 2 seconds.
Now release the
«Frequency switching»
key.
Completely move the Surface Mounted Joystick in one direction and return it to
the 0-position. Repeat this for all directions. Perform point 5 for all other Surface
Mounted Joystick if required. Reactivation of teach mode is not required.
Press the
«On/Horn»
key once. Teach mode will be closed and the new Surface
Mounted Joystick will function as intended by the system design.
Attention! The transmitter is now in working mode!
Error:
If
«Jt»
does not appear in the display, please switch off the transmitter and
start teach mode activation from the beginning!
Содержание Compact-M
Страница 11: ...10 Variations Receiver Compact M Compact MA Compact MB Compact MC Compact MD...
Страница 19: ......
Страница 20: ...17 Technical documents...