NBB Compact-M, Руководство по эксплуатации, Страница: 10 / 21

9
Surface Mounted Joystick teach mode activation with pushbutton and display:
n
1.
2.
3.
5.
6.
7.
n
The TEACH MODE, memory of max. and min.-values of the valves adjustment with
proportional control, is activated by a separate combination of keys.
Please refer to the technical annex.
Nano-M SMJ
See nameplate
Switchable frequency to respective national band possible as a result of synthe-
sizer technology.
Addressing each transmitter using a unique bit combination
FSK - Signal acc. to CCITT V.23
1200 -9600 baud (bit / sec.)
Approx. 300 - 1000 m (depending on environment)
Accumulateur 7.2 V NBB
60 - 100 mA
<
10 mW ERP
IP 65
From -20 to +65 °C
3500 g
354 x 229 x 141 mm
Technical data
Transmitter
Transmission frequency range
Data security
LF-modulation
Baud rate
Range
Operating voltage
Current consumption
RF output
Protection class
Operating ambient temperature
Weight (without battery)
Measurements (L x W x H)
Technology SMJ - Surface Mounted Joystick
5
5
3
1
6
4
2
To activate teach mode, the transmitter must be switched off.
Press and hold the «Frequency switching» key.
Switch the transmitter on.
«Joy Teach» with graphics appears in the display after 2 seconds.
Now release the «Frequency switching» key.
Completely move the Surface Mounted Joystick in one direction and return it to
the 0-position. Repeat this for all directions. Perform point 5 for all other Surface
Mounted Joystick if required. Reactivation of teach mode is not required.
Press the «On/Horn» key once. Teach mode will be closed and the new Surface
Mounted Joystick will function as intended by the system design.
Attention! The transmitter is now in working mode!
Error: If «Joy Teach» does not appear in the display, please switch off the transmitter
again and start teach mode activation from the beginning!