NBB Compact-M Скачать руководство пользователя страница 7

Switching the transmitter on and off

Design with emergency stop

Unlock the 

Emergency Stop pushbutton

 by turning clockwise to switch on the 

transmitter.

Two short signals can be heard.

A red dot flashes in the LED display and an antenna symbol appears in the LC display 

during operation. 

The transmitter is switched off by pressing the 

Emergency Stop pushbutton

 once.

After pressing the EMERGENCY STOP switch, stop telegrams are sent for 2 seconds 

to switch off the system. This shut-off time is displayed on the LED display by the 

segments rotating clockwise.

To ensure faultless operation, please observe the following rules for operation precisely:  

The system to be controlled - provided the transmitter is ready for operation - can only 

be switched on if no command transmitters are activated. The command necessary 

for this is activated by the 

«On/Horn»

 key. Here a horn signal is triggered for the 

system to be controlled. After switching on the system to be controlled, this key 

is used, according to the work specifications, for repeated triggering of the horn 

signal.

Frequency switching: 

To switch the frequency, press and hold the 

«On/Horn»

 key. Now press the 

«Frequency 

switching» 

key successively. If the receiver locks on a new frequency, a horn signal can 

be heard and the system is ready for operation. 

Please observe the country-specific regulations, if applicable.

The system can also be equipped with automatic frequency switching (LBT) as an option.

Operation of the system

 

6

Operation:

The red dot flashes.

FREQUENCY  SWITCHING 

ON/HORN

FREQUENCY SWITCHING

Содержание Compact-M






















Отзывы: