NBase NH 210, Инструкция по установке и эксплуатации

Страница: 2 / 18

Standards Compliance
UL 1950; CSA 22.2 No 950; VCCI; FCC Part 15 Class A; CE-89/336/EEC, 73/23/EEC
FCC Notice
WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radi-
ate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harm-
ful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
The user is cautioned that changes and modifications made to the equipment without approval of the manufacturer
could void the user’s authority to operate this equipment
It is suggested that the user use only shielded and grounded cables when appropriate to ensure compliance with FCC
Rules.
CE Mark
The CE mark symbolizes compliance with the EMC directive of the European Community. Such marking is indica-
tive that the specified equipment meets or exceeds the following technical standards:
•
EN 55022 - “Limits and Methods of Measurement of Radio Interference Characteristics of Information
Technology Equipment”
•
EN 50082-1 - “Electromagnetic compatibility -- Generic immunity standard Part 1: Residential, commercial and
light industry”
•
IEC 1000-4-2 - “Electromagnetic compatibility for industrial-process measurement and control equipment
Part 2: Electrostatic discharge requirements” -- Severity level 3
•
IEC 1000-4-3 - “Electromagnetic compatibility for industrial-process measurement and control equipment
Part 3: Radiated electromagnetic field requirements” -- Severity level 2
•
IEC 1000-4-4 - “Electromagnetic compatibility for industrial-process measurement and control equipment
Part 4: Electrical fast transient/burst requirements” -- Severity level 2
•
CISPR 22 - Radiated and Line-conducted Class A
•
EN 60950 - ITE Safety
A “Declaration of Conformity”, in accordance with the above standards, has been made and is on file at NBase
Communications Ltd.
VCCI
This equipment is in the 2nd Class category (information equipment to be used in a residential area or an adjacent
area thereto) and conforms to the standards set by the Voluntary Control Council For Interference by Information
Technology Equipment aimed at preventing radio interference in such residential area.
When used near a radio or TV receiver, it may become the cause of radio interference. Read the instructions for
correct handling.
ATTENTION This product contains no user-serviceable parts. Unauthorized intervention
may void the warranty.
NH210.QXD 21/6/99 13:22 Page 2