Naxpro Truss SD Series, Инструкции по эксплуатации и монтажу

Страница: 8 / 25

8
Information on spare parts
Only the use of original spare parts is allowed. These can be obtained by your Naxpro-Truss-dealer.
Information on periodic inspections
Truss systems are to be tested depending on the type and frequency of use so that defects and damage can be detected in time. They
are to be inspected at least annually by a competent person. The inspections involve in particular:
a) Deformation (bending, twisting, ...)
b) Damage (cracks, holes, ...)
c) Missing parts (connecting braces / diagonal struts / connectors, ...)
d) Achieving the discard criteria
If there is doubt that the trusses are damage-free after a visual inspection, another inspection method (eg. dye penetrant
inspection,ultrasonic testing)has to be applied. The operator must ensure that the results of the periodic inspections are recorded in
an inspection log / audit file. (For test certificates also see BGV C1 § 35).
Information on discard criteria
The discard criteria of trusses are given, when the evaluation of the following criteria to ensure safety for the duration of use is no
longer guaranteed.
Profile construction: a) Reduction of the cross section caused by wear
(Main straps and connecting braces / diagonal braces)
b) Reduction of the weld thickness due to wear
c) Plastic deformation of the profiles
d) Holes in the profiles
e) Lack of profiles or struts / diagonal braces
f) Displacement of the carrier profile (truss no longer matches other trusses)
g) Broken welds
h) Improper repair
i) Corrosion of the profile construction
Connectors and
connecting elements:
a) Wear and a reduction of the cross section caused by wear on the connector
b) Reduction of the weld thickness caused by wear
c) Plastic deformation of the connector
d) Enlargement of the holes
e) Plastic deformation of the connecting elements
f) Evidence of corrosion on the connectors and fasteners
g) Evidence of corrosion between the bearing profiles, the connectors and connecting elements
h) Broken welds
i) Improper repair
Riggatec Halfcoupler light
100 kg: Art.-No.: 400200000 Riggatec Hanging point for average loads:
Art.-No.: 400201100 Riggatec Gloves:
Art.-No.: 400200850 Riggatec Aluminum mallet:
Art.-No.: 400200365
Accessories / hanging points:
Please ensure that all suspended lights or PA-components by are secured an
additional safety rope.
Riggatec Safety rope:
100cm / 4mm: Art.-No.: 400201015
60cm / 4mm:
Art.-No.: 400201010
60cm / 3mm: Art.-No.: 400201000
ENGLISH
Riggatec Dolly Multiplex for 2, 3 and 4-point
290mm trusses
Art.-Nr.: 400201250