www.naxa.com
Page 17
Using the AUX Input
Set the FUNCTION switch [3] to the CD/MP3/USB/AUX
position to play devices connected to the AUX Input
jack [22].
1. Connect the audio source to the player. Use an op-
tional audio patch cable to connect the 3.5mm
headphone or line-out jack of the audio source to
the 3.5mm AUX Input jack [22] found on the back of
the player.
2. Prepare the player. Set the FUNCTION switch [3] to
the CD/MP3/USB/AUX position. Turn the VOLUME
dial [4] to lower the volume level.
3. Prepare the audio source. Start playback on the
device. Set the volume level of the device to ap-
proximately 80% of its maximum.
4.
Adjust the final volume. Turn the VOLUME dial [4]
of the player to set the volume to a comfortable
level.
⚠
L
Use the audio source to control playback
(e.g., stop, play, next). Use the player to
control the volume.
