Page 10
Naxa Electronics
Basic Functions
Turning the Unit On and Off
To turn the unit on, press the POWER button [2]. The
power indicator [18] will light up.
To turn the unit off, press the POWER button [2] again.
Changing Function Modes
Set the FUNCTION switch [3] to one of the function po-
sitions (e.g., CD/MP3/USB/AUX, RADIO).
⚠
L
To change between CD and USB modes,
press and hold the PLAY/PAUSE/USB key
[17] while the FUNCTION switch [3] is set to
CD/MP3/USB/AUX.
Adjusting the Volume
Turn the VOLUME dial [4] clockwise or counter clockwise
to increase or decrease the volume level, respectively.
Bass Boost
Turn the Bass Boost adjustment on to emphasize low
frequency sound output.
Press the BASS key [11] to turn Bass Boost on and off.
⚠
L
Producing low frequencies at high volumes
can be demanding for audio equipment. If you
experience audio clipping when Bass Boost is
turned on, lower the volume gradually.
Using the Radio
Set the FUNCTION switch [3] to the RADIO position to
start using the radio.
1. Select a frequency band. Set the BAND switch [9] to
the AM, FM, or FM ST. position.
2. Turn the Radio Tuning dial [8] to tune to a radio
station; the current station can be seen on the LCD
screen [19].
