Naxa NAS-3071, Инструкция по эксплуатации, Страница: 8 / 16

Page 8 Naxa Electronics
Using FM Radio Mode
Press and hold [8] to set the active mode to FM.
⚠ L
You must connect the included AUX cable
to the AUX connector [3] in order to use
the FM radio. The AUX connector is also
used for FM radio reception.
To optimize reception, extend the connect -
ed AUX cable and adjust its position.
Automatic Station Scan
Use the station scan feature to find stations within
broadcast reception range and save them to preset
memory.
1. Press [8] once. The speaker will search for and
store stations automatically.
⚠ L
Scan for new stations any time you move
the speaker. Scanning for new stations will
replace the old stations.
FM Radio Controls
To do this... ...do this
Tune to the next station Press .
Tune to the previous station. Press .
Scan for stations and auto save
them to preset memory Press .