Naxa NAS-3071, Инструкция по эксплуатации, Страница: 5 / 16

www.naxa.com Page 5
Connecting Power
Your speaker has an integrated rechargeable battery.
Upon initial use, the battery should be charged fully to
ensure optimal performance and battery life.
Use the included USB charging cable to connect the
speaker to a USB power source to charge the battery.
• Connect the small end of the cable to the USB
charge port [4] of the unit.
• Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
⚠
⚠
The battery used in this device may pres-
ent a fire or chemical burn if mistreated.
Do not disassemble, incinerate, or heat the
battery. Do not leave the battery in a place
subject to direct sunlight, or in a car with its
windows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of fire
or electric shock.
The Status LED [2] will light a steady red when the bat-
tery is charging. When charging is complete, the Status
LED will darken.
⚠ L
It takes approximately 3 to 5 hours to
charge the unit fully when connected to a
standard USB port.
⚠
⚠
Do not charge the unit for more than 8
hours to optimize the lifetime performance
of the battery.