Naxa NAS-3062, Инструкция по эксплуатации

Страница: 5 / 16

www.naxa.com Page 5
Connecting Power
Your speaker has an integrated rechargeable battery.
Upon initial use, the battery should be charged fully to
ensure optimal performance and battery life.
Use the included USB cable to connect the speaker to a
USB power source to charge the battery.
• Connect the small end of the included USB charge
cable to the DC 5V USB charge port of the speaker
[2].
• Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
L L
A red LED will light up when the speaker is
charging.
It takes approximately 4 hours to fully
charge the battery.
L
⚠
To optimize the performance and longev-
ity of the battery, do not charge it for more
than 4 hours.
L
⚠
The battery used in this device may present
a fire or chemical burn if mistreated. Do not
disassemble, incinerate, or heat the battery.
Do not leave the battery in a place subject
to direct sunlight, or in a car with its win-
dows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of fire
or electric shock.
To turn the speaker on, set the Function switch [1] to the
MP3 or BT position. The LEDs will light up.
To turn the speaker off, set the Function switch [1] to
the OFF position.