Naxa NAS-3062, Инструкция по эксплуатации

Страница: 6 / 16

Page 6 Naxa Electronics
Pairing a Device with
Bluetooth
®
A device must be paired with the speaker before using
them together for the first time.
Set the Function switch [1] to the BT position to place
the speaker in Bluetooth mode. The speaker will auto-
matically search for and connect to a previously paired
device. If this is your first time using a device with the
speaker, it will switch to Pairing mode (the speaker will
emit an ascending 4-note tone). Then:
1. Make sure Bluetooth
®
is enabled on your device.
Enable it if it hasn’t.
2. Use your device to search for available Bluetooth
devices (i.e., your speaker). This function is usually
in the Bluetooth settings menu; refer to your de-
vice’s instruction manual to learn more
3. The speaker will announce itself as “NAXA NAS-
3062.” Select the speaker.
4. If your device asks for a passcode, use “0000” to
complete the pairing process.
The speaker will emit a 2-note tone when the speaker
is paired and connected to a device.
L L
If the pairing process fails, turn the speaker
off, set the Function switch [1] to BT, and
repeat steps 1-4 again.
Make sure that the volume of your device is
set to its maximum level; use the speaker to
adjust the volume to a comfortable level.
The speaker cannot be paired with more than
one device at a time.
Using the Speaker
When the speaker is connected to a Bluetooth® device:
To do this... ...do this
Start, pause, or resume audio
playback Press M / .
Skip to the previous track Press / –.
Skip to the next track Press + / .
Decrease the volume level Hold / –.