Naxa NAS-3047, Инструкция по эксплуатации

Страница: 3 / 12

www.naxa.com Page 3
Connecting Power
Your speaker has an integrated rechargeable battery.
Upon initial use, the battery should be charged fully to
ensure optimal performance and battery life.
Use the included USB cable to connect the speaker to a
USB power source to charge the battery.
• Connect the small end of the cable to the USB
charge port of the unit.
• Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
⚠
⚠
The battery used in this device may present
a fire or chemical burn if mistreated. Do not
disassemble, incinerate, or heat the battery.
Do not leave the battery in a place subject
to direct sunlight, or in a car with its win-
dows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of fire
or electric shock.
The status indicator will light a steady red when the
battery is charging. When charging is complete, the
status indicator will darken.
⚠ L
It takes approximately 2 hours to charge
the unit fully when connected to a stan-
dard USB port.
To turn the speaker on and off, press and hold the
POWER button.