2010-04-20
P/N: 240-0008-00-02
Copyright 2009-2010 NavWorx ®
Page 31 of 46
All rights reserved. Printed in the U.S.A.
TRANSMITTER Commands
Command Option
Description
ENABLE
CSID
Enable call sign identification flag logic.
DISABLE
CSID
Disable call sign identification flag logic.
ENABLE
PALT
Enable pressure altitude input.
DISABLE
PALT
Disable pressure altitude input.
SET
CALLSIGN <8 character callsign>
Assign aircraft call-sign. The call-sign may not exceed 8 characters.
Must be Alpha-Numeric characters only. No other characters
allowed.
SET
CAT <NOTYPE | LIGHT | SMALL | LARGE |
VERYLARGE | HEAVY | MANEUVERABLE |
ROTORCRAFT | GLIDER |LIGHTERTHANAIR |
PARACHUTIST | ULTRALIGHT | UAV |
SPACEVEHICLE | EMERGENCY | SERVICE |
POINTOBSTACLE |CLUSTEROBSTACLE |
LINEOBSTACLE>
Assign aircraft category.
SET
GPSANT <left|right> <x.y>
Set GPS antenna lateral axis [left or right of centerline] position in
meters.
SET
GPSANT nose <x.y>
Set GPS antenna longitudinal axis [from nose] position in meters.
SET
GS <knots>
Assign speed in knots which determines when aircraft is airborne.
SET
ICAO <hexadecimal>
Assign the aircraft’s ICAO address in a hexadecimal format.
http://www.smalluas.com/download/ICAO_Annex_10_Volume_III.p
df
SET
LENGTH <x.y>
Set length of aircraft in meters.
SET
WIDTH <x.y>
Set width of aircraft in meters.
TRANSMITTER (Pilot Input) Commands
Command Option
Description
SET
EMERGENCY <NONE | GENERAL | MEDICAL |
MINFUEL | NOCOMM | HIJACK | ACFTDOWN>
Set emergency code.
SET
FLIGHTID O:<octal-number>
Set flight ID as an octal 4 to 6 digit number. E.g.
SET FLIGHTID O:1200
IDENT
Start IDENT. Mode status message is transmitted for 20 +/- 4
seconds.
ENABLE
SAA
Enable transmission of the temporary self-assigned address. The
self-assigned address will be transmitted instead of the ICAO
address.
DISABLE
SAA
Disable transmission of the temporary self-assigned address. The
ICAO address will be transmitted instead of the self-assigned
address.
UTILITY Commands
Command Option
Description
RESET
Reset unit.
ENABLE
SIM
Enable simulation mode.
DISABLE
SIM
Disable simulation mode.
SET
LOADER
Used for updating unit software.