1.5 Appearance of the device
On the front part of the device unit (figure 1) is located:
14-pin connector of Microfit-14 type for connection of power supply, digital and analog sensors and control
lines.
6-pin connector of Microfit-6 type with leads of CAN bus interface, RS-485 interface and RS-232 interface;
4-pin connector of Microfit-4 type for connection of 2-way speakerphone interface;
SMA connector for connecting a GSM antenna (on the left);
SMA connector for GLONASS / GPS antenna connection (on the right).
On the side of the device unit (figure 2) is located:
MiniUSB connector for connection with a computer;
SIM card holder slot with ejector (yellow button).
In the upper part of the device unit (figure 3) there are three indicators:
system indicator (SYS)
modem operation indicator (GSM);
navigation receiver indicator (NAV).
Figure 1. Device unit (front view).
Figure 2. Device unit (side view).
Figure 3. Device unit (top view).
