NavRoad NR430BT, Руководство пользователя

Страница: 7 / 31

3.1 Getting Start
Performing the initial Start Up
Slide the Battery ON/OFF switch the ON position.
Note : Always leave the Battery ON/OFF Switch in the ON
Position for normal operation.
Power ON/OFF
Your device turns on when pull down the bar switch to Power.
Chapter 3
Basic Operations
Follow the instructions on the Installation Poster to dock your
NavRoad NR430BT in your car. The first time you turn on your
NavRoad NR430BT, it may take up to 10 seconds to start. To
power off your NavRoad NR430BT, pull down the bar switch.
Locating your current position
Your NavRoad NR430BT must be outside to locate your current
position. The first time you start your NavRoad, it can take up to
5 minutes to find your current position. If it takes longer than 5
minutes, make sure that you are in an open place without tall
buildings or trees around you.
In the future, your position will be found much faster, normally
within a few seconds.
Once your NavRoad has located your current position, the
Driving View is shown in full color and shows your position on
the map.
Note : Some vehicles have a heat reflective shield embedded in
the windshield that may prevent NavRoad NR430BT from
locating your current position. If this is a problem in your
vehicle, use the NavRoad NR430BT External Antenna Kit
(available as an accessory).
7