Navman Qube 300, Руководство по установке

Страница: 5 / 18

Qube 300 | Installation Manual
5
2 Qube 300 Hardware
2.1 Box Contents
Qube 300 3-Wire power cable (1.9 m)
Clear plastic security cover (upper part) 4 self-tapping mounting screws AND 4
washers
Clear plastic security cover (lower part) 3 screws for the security cover
2.2 Other Components Required
You will also need the following components before starting the installation:
 GPS Antenna
 Cellular Antenna
To allow for quicker and easier installations, Navman Wireless recommends the use of the combination
antenna that includes both GPS and cellular components built into same housing (SAP#10001358).
Note:
You can use a combi-antenna OR a separate GPS Antenna and a separate Cellular Antenna.
Contact your Navman Wireless dealer for advice on the best choices for your type of installation and for
ordering information, if necessary.
Depending on the installation requirements, you may also need the following components:
 8-Wire I/O cable (SAP#10001294)
 10-Wire I/O cable (SAP#10001293)
 Navman Wireless digital temperature probes (and Installation Manual)
 Satellite Modem cable (SAP#10001311)
Note: The 3-Wire Power cable, the GPS Antenna, and the Cellular Antenna are the minimal requirement for
tracking only.