Never clean your Navman when it is turned on. Use a soft, lint-free cloth to wipe the screen and the
exterior of your Navman.
Do not use paper towels to clean the screen.
Never attempt to disassemble, repair or make any modifications to your Navman. Disassembly,
modification or any attempt at repair could cause damage to your Navman and even bodily injury or
property damage and will void any warranty.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your
Navman, its parts or accessories.
Troubleshooting
If you encounter a problem you cannot solve, contact an authorised service centre for assistance.
Problem
Steps to Take and things to check
What Next?
The unit is not
turning on/charging
Try to charge the unit through a USB cable
connected to a computer. If the unit charges
then the issue is with the in car charger. If the
unit still fails to charge, then the fault is with
the unit.
Contact technical support and an
RMA will be created to fix the unit
or replace the in car charger.
I can not get a GPS
Signal
Make sure you are stationary and have a clear
line of site to the sky. If this fails to resolve the
issue, please reset the GPS chip through the
Settings menu of your unit.
If the fault is still not resolved,
please visit our self help site on
www.navman.com.au/support
or
contact our technical support
team.
My unit is always
showing that the
speed limit is 70 kph
even when it is not
The units are set at a manual speed limit
defaulted at 70 kph. This can be changed
through the 'Safety' section of your 'Settings'
menu.
If the fault is still not resolved,
please visit our self help site on
www.navman.com.au/support
or
contact our technical support
team.
The unit is not
showing any
addresses in my
state.
When you type in an address through the 'Find'
Menu, please ensure that the correct state for
the destination is showing after ' Find in:…'. If
the correct state is not selected, no results will
be shown.
If the fault is still not resolved,
please visit our self help site on
www.navman.com.au/support
or
contact our technical support
team.
Where is my product
key? I want to
activate my unit.
There is no need to activate your unit in
anyway. This Activation tab within the
NavDesk software is for subscriptions, travel
books, international maps and map upgrades
only. Your unit will work straight out of the box
and there is no need to activate it in anyway.
If the fault is still not resolved,
please visit our self help site on
www.navman.com.au/support
or
contact our technical support
team.
Navman Customer Support
To report a faulty product or speak to a member of our Technical Support team, contact:
Australia: 1300 NAVMAN (628626), or visit
www.navman.com.au
.
New Zealand: 0800 GO NAVMAN (46 628626), or visit
www.navman.co.nz
.
18
Содержание MY 65T Series
Страница 1: ...MY Series MY T T T Series Hardware User Manual...
Страница 19: ...MY T T T Series Software User Manual MY Series...