Navman M-Nav 750, Руководство пользователя

Страница: 17 / 56

M-Nav 750 | User Manual
17
5 Messages
IMPORTANT: The M-Nav 750 must be in the docking cradle and connected to the Qube
tracking device in order for you to send and receive messages and otherwise communicate
with your fl eet administrator through the OnlineAVL2 application.
The M-Nav 750 can store a maximum of 500 incoming messages and 250 outgoing messages.
If you exceed the limit for incoming messages, the oldest message will be deleted automatically
when a new message is received.
5.1 Types of Message
The Message option enables you and your fl eet administrator to communicate with each other.
There are two types of message:
• Information messages; A message from your fl eet administrator e.g. “‘supplies ready
for pick up from the workshop”; or a message that you send e.g. “completed job”.
• Route-to messages; A message from your fl eet administrator with an embedded GPS
location you can use for navigation to an address e.g. “55 Keele Rd, Keele, Newcastle –
customer Anna Thompson, cold water coming out of the hot water tap in the kitchen”.
This message contained the address you will be navigated to in the fi rst line of the message.
5.2 New Messages
When a new message arrives, the New Message popup box
is displayed on the current screen and a friendly alert sounds.
Touch:
• Read to display the new message immediately.
• Cancel to store the message in your Message List to read
it later, when it is safe or convenient.
Examples of the two message types are shown below.
This example shows an information message. Touch:
• Back to close the message without sending a reply.
• Reply (see Section 5.4).
• Delete (see Section 5.6).