Navman iCN 610, Руководство пользователя

Страница: 53 / 88

53
iCN 600 series | User Manual
13. Route Demonstrator
The Route Demonstrator allows you to:
• Preview a route.
• Plan and view a route without a GPS fix, such as when you are inside a building.
Step One: Activate Route Demonstrator
1. From the Main Menu screen, select Preferences , then press OK .
2. From the Preferences screen, select Routing , then press OK .
The Routing screen will display.
3. Press twice.
4. Select the Demonstrate Route check box, then press OK .
5. Select Save , then press OK .
The Main Menu screen will display.
Step Two: Select Departure Point
If you have a GPS fix, you do not need to select a departure point unless you want the
demonstrated route to start elsewhere.
1. From the Main Menu screen, select Map .
The
2D Map
screen will display.
2. Press OK to display the cross-hair on the 2D Map screen.
3. Position the intersection of the cross-hair using the 8-way toggle . Where the cross-hair
intersect on a street, the street name will display at the bottom of the
2D Map
screen.
4. Press OK .
The Pop-up menu will display.
5. Select
Set as Start Location
, then press
OK
.
The Pop-up menu will close.
Step Three: Select Destination Point
Set a destination either by using the Destination screen (see pages 17-33) or by using the 2D
Map screen Pop-up menu by completing the following:
1. Press
OK
to display the cross-hair on the
2D Map
screen.
2. Position the intersection of the cross-hair using the 8-way toggle . Where the cross-hair
intersect, with a street, the street name will display at the bottom of the 2D Map screen.
3. Press OK .
The Pop-up menu will display.
4. Select Navigate To , then press OK .
The
Pop-up
menu will close. The
3D Map
screen* will display the calculated route in
Route Demonstrator mode.
• If you have selected the Repeat check box on the Routing screen, the Route
Demonstrator will continue to repeat the route.
*iCN 610, 620 will display the 2D Navigation Map screen.