Version 21.10.2022
HW: 25(V21)
RL2-LR14
P
a
g
e
5
1.3.
Boxes and connectors – video interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and
converts them for the video interface.
1.4.
Settings of the 4 Dip switches
The 4 dip-switches of the video are used to select the kind and choice of
the factory head-unit.
Dip position down is ON and position up is OFF.
After each Dip-switch-change a power-reset of the video interface has to be performed!
Dip
Funktion
ON (unten)
OFF (oben)
1
No function
Set to OFF
2
Vehicle selection
Set to ON
3
No function
Set to OFF
4
No function
Set to OFF
