Version 21.10.2022
HW: 25(V21)
RL2-LR14
P
a
g
e
12
2.6.
Picture settings and guide lines
The picture settings are adjustable by the 3 push-buttons at the rear-side of the video-
interface. Press the MENU button to open the OSD settings menu or to switch to the next
menu item. Press UP and DOWN to change the selected value. The buttons are placed inside
in the housing to avoid accidental changes during or after the installation. Picture settings
must be done separately for all video inpouts while the corresponding input is selected and
visible on the monitor.
Note: The OSD menu is only shown when a working video source is connected to the rear-
view camera input of the interface.
The following settings are available:
Brightness
Saturation
Position H (horizontal)
=
horizontal picture position
Position V (vertical)
=
vertical picture position
IR-AV1
=
no function
IR-AV2
=
no function
Guide L
=
distance-left guide-line
Guide R
=
guide-lines position
Guide-CNTRL
=
guide-lines/PDC On/Off
H-SIZE
=
horizontal picture size RVC
V-SIZE
=
vertical picture size RVC
Note: If there is no communication between interface and the vehicle`s CAN-bus (several
vehicles aren’t compatible), the reverse gear guide-lines can`t be shown during the vehicle’s
operation, even if they once appear after having switched the system to powerless!
