Version 22.12.2022
HW CAM (V31)(V64)
RL1-GVIF
P
a
g
e
16
2.7.
Picture settings
The picture settings are adjusted by the 3 buttons on the video-interface. Press the MENU
button to open the OSD settings menu or to switch to the next menu item. Press UP and
DOWN change the selected value. The buttons are embedded in the housing to avoid
accidental changes during or after installation. Picture settings have to be done separately
for AV1 and for AV2 while the corresponding input is selected and visible on the monitor.
AV2 and CAM share the same settings which must be adjusted in AV2.
Note: The OSD menu is only shown when a working video source is connected to the
selected video-input of the interface.
The following settings are available:
Brightness
Contrast
Saturation
Position H (horizontal)
Position V (vertical)
IR-AV1
=
no function
IR-AV2
=
no function
Guide -L
=
no function
UI-CNTL
=
no function
Guide-CNTRL =
no function
H-SIZE
=
horizontale Bildgröße
V-SIZE
=
vertikale Größe
