Version 22.12.2022
HW CAM (V31)(V64)
RL1-GVIF
P
a
g
e
10
2.4.
Connection
–
picture signal cable
Remove factory monitor.
Connect female HSD+2pin connector of the picture signal cable to the male HSD+2pin
connector on the rear-side of the interface.
Remove the female GVIF connector from the rear-side of the factory monitor and
connect it to the male GVIF connector of the picture signal cable.
Connect female GVIF connector of the picture signal cable to the male GVIF
connector of the factory monitor.
