Naviter Oudie 4, Руководство пользователя

Страница: 58 / 158

Oudie 4 53
© 2003 - 2016 ... Naviter d.o.o.
4.3 Arrow towards the North
Map orientation on Oudie 3 is not always "North up" It can be anything, therefore the North arrow is
always pointed in the direction of true North. By tapping the North arrow a menu will open up where you
can select any of the other possible Map orientations.
North, East, South and West Up, will rotate the map so, that the selected orientation is towards the top
of the screen.
Goal Up will put the direction of the Selected Goto Waypoint to the top of the screen. Track Up will put
the direction of the current track towards the top of the screen.
When panning the map freely, the arrow gets a caption "Pan mode". Tapping once on this symbol
returns the view back to the glider and original map orientation.
See also:
Map orientation
4.4 Wind vector
The wind vector gives you a graphical and textual orientation about the wind at current height. The new
sensors (and clever use of the Kalman filters if you like) allowed us to improve wind prediction
considerably. In the best case scenario Oudie 4 will give a useful wind estimate already after a single 180
degree turn on the ridge. It also works at wind speeds higher than your airspeed. Additional turns make
the prediction better of course. There is even lots of room for improvement of this in the future.
A tap on the Wind symbol will open the Wind dialog. You can also access it through Menu > Wind
4.5 Vector map
Oudie 4 uses the CIT maps to display terrain and topographic features. These are the same maps also
used in the desktop version of SeeYou. Maps for the whole world are preloaded on Oudie 4 already. Just
turn it on and you will have a map.
Map preferences can be setup through the Setup Map dialog.
66
66
86
92