Navistar MaxxForce DT 9 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 109

background image

SECTION 2 – REQUIREMENTS FOR FUEL, ENGINE OIL, AND COOLANT

Coolant

COOLANT MIXTURES

Engine coolant mixtures include water, glycol (ethylene or
propylene), and inhibitors. Conventional and fully formulated
coolants require regular testing of inhibitor levels to maintain
safe levels of protection.

Testing of conventional coolant

determines levels of nitrite, nitrite/molybdate, and freeze point
protection.

If necessary, Supplemental Coolant Additives

(SCAs) are added to replenish inhibitors.

Extended life coolant mixtures (water and ethylene glycol) do
not require regular testing of inhibitor levels or addition of SCAs.
See (page 59) for service intervals.

EXTENDED LIFE COOLANT (ELC) – RED

Heavy Duty Extended Life Coolant (ELC) 50/50 Premix meeting
CEMS B-1 Type III is the standard factory fill for the cooling
system.

The coolant should minimally meet ASTM D6210,

Standard Specification for fully - Formulated Glycol Base
Engine Coolant for Heavy Duty Engines.

ELC 50/50 Extender is added at the designated service interval.
For further information see Extended Life Coolant (ELC)
Extender (page 88).

Freeze Point Protection Levels Concentrate (ethylene
glycol) and Water Mixtures

Concentrate and Water
Mixtures

Freeze Point Protection

40% Concentrate and 60%
water

-24.4 °C (-12 °F)

50% Concentrate and 50%
water

-36.7 °C (-34 °F)

60% Concentrate and 40%
water

-52.0 °C (-62 °F)

67% Concentrate and 33%
water

-70.6 °C (-95 °F)

For vehicles operating in extremely cold climates, a coolant
mixture of 60% Concentrate and 40% water or 67% Concentrate
and 33% water provide freeze protection as shown in previous
table.

Mixtures having more than 67% Concentrate are not

recommended.

For cooling system service, see (page 90).

Form No. 1172040R1

Page 34

Printed in the United States of America

«
...
40
41
42
43
44
...
»

Содержание MaxxForce DT 9














































































































Отзывы:

Нет отзывов

Похожие инструкции для MaxxForce DT 9

Бренд: Beta Marine Страницы: 88

Бренд: ebm-papst Страницы: 9

Бренд: Engine distributors Страницы: 331

Бренд: MTD Страницы: 36

Бренд: Saito Страницы: 2

Бренд: Stark Страницы: 14

Бренд: Reely Страницы: 4

Бренд: Atlas Imperial Diesel Engine Страницы: 59

LZB 77 A0017-15

Бренд: Atlas Copco Страницы: 120

Бренд: Volvo Penta Страницы: 94

Бренд: AE Страницы: 4

Бренд: Volvo Страницы: 64

Бренд: Pratt & Whitney Страницы: 576

Бренд: DANA Страницы: 3

Бренд: DANA Страницы: 3

Бренд: Sachs Страницы: 59

Бренд: Hägglunds Страницы: 23

Бренд: O.S. engine Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды