NAVIN Corporation
w
ww.navin.com.tw
Reading Current Pace
1.
Click Power/Mode key to select Sports icon
.
2.
Click Mark key until no unit shows and the current pace
is displayed.
3.
Unit of pace is minutes/Km or minutes/mile depending
on whether metric unit or English unit is currently used.
4.
If the pace is more than 19 minutes 59 seconds, it will
only show 19:59.
Reading Maximum Speed
6.
Click Power/Mode key to select Sports icon
.
7.
Click Mark key until
shows and
km
flashing under
metric unit mode, or
mi
flashing under English unit
mode. The maximum speed is displayed in unit of km/hr
or mi/hr.
8.
The maximum speed can be cleared by pressing and
holding Mark key, wait until the circle of direction arrows
shows up and then release Mark key; maximum altitude
is cleared altogether.
Reading Maximum Altitude
1.
Click Power/Mode key to select Sports icon
.
2.
Click Mark key until
shows and
m
displayed
under metric unit mode, or
ft
displayed under English
unit mode.
3.
The maximum displayed altitude number is 19.99, with
unit in kilometer or mile.
4.
The maximum altitude can be cleared by pressing and
holding Mark key, wait until the circle of direction arrows
shows up and then release Mark key; maximum speed is
cleared altogether.
Note: GPS altitude is much less accurate than horizontal position
accuracy. GPS receivers with more accurate altitude reading
usually employ barometric pressure sensor for altitude
measurement. miniHomer does not have such sensor inside and
shows GPS derived altitude directly; thus altitude reading should
be used as coarse estimate only.
