NAVIN Corporation
w
ww.navin.com.tw
Checking Current Location Coordinates (
where-
AM
-i)
1.
Click Power/Mode key to select where-AM-i icon
.
2.
Make sure satellite icon
is not blinking.
3.
The current latitude and longitude coordinates will be
displayed in the same manner as described in Checking
Free Marking Coordinates section.
4.
Clicking Mark key toggles between displays of
latitude/longitude coordinates and mean sea level
altitude.
5.
The maximum displayed altitude number is 19.99, with
unit in kilometer or mile.
Note: GPS altitude is much less accurate than horizontal position
accuracy. GPS receivers with more accurate altitude reading usually
employ barometric pressure sensor for altitude measurement.
miniHomer does not have such sensor inside and shows GPS derived
altitude directly; thus altitude reading should be used as coarse estimate
only.
Storing Point of Interest
1.
Click Power/Mode key to select
icon.
2.
Make sure satellite icon
is not blinking.
3.
Press and hold Mark key, wait until the circle of direction
arrows shows up and then release Mark key.
4.
The current location coordinate is stored as a Point of
Interest (POI), and the POI number is displayed.
Note that you can store many POI until the memory is full.
