If you have the NMEA data inside the protocol window, but not data in your GPS software, you a
have wrong GPS setup in it. Please setup the right baud rate and com port. Close GPS Info
before you open a GPS software. It is not possible to use two GPS tools on one GPS Com port
at the same time.
6. EGNOS Konfiguration with GPS Info
To switch over the NL-442U to WASS/EGNOS turn on, please switch over to the Setup mode,
and set the hook selection with WAAS / EGNOS.
4800
COM Port Setup
Baudrate setup
Switch on/off the GPS rec eption
Switch on/off additional functions
NMEA protokol window
Choise between the info and
satellite over head view
Switch to c old start function
