-9-
Danger in case of fire contact !
Don’t expose the Monitor to permanent temperature above 60°C/140° F!
6. Possible Sources of Malfunction and Troubleshooting
6.1. The device cannot be switched on. Please check if the power supply to the
vehicle was set properly and if the Power button lights red. If the Power button
does not light in red, the power supply may not be set properly. Make sure
you are using the original power cable or power supply which is included in
delivery.
6.2. Your PC does not support the Autostart function and does not start the CD
ROM automatically. Please read http://msdn2.microsoft.com/en-us/library/
Aa96929.aspx.
6.. The display remains dark, although it is switched on. Please check the
correct selection of input via OSD. If the display is still dark and the power
button lights green and the other buttons blue, after pressing the Menu/OSD
button, there might be a defect. In this case please contact the support.
6.4. You can see a picture but the application does not fit into the display. Scale
down the resolution of operating system. There was a resolution which is not
supported by the monitor.
The Navilock Repair Center aims to be as fair as possible. So we kindly ask you
to give a true error description. The error analysis helps to find out if there was a
water damage, interference by a third party, a fall, overvoltage or wrong handling.
Often malfunctions are caused by minor errors. It is not always necessary to
immediately replace a product, because this will not correct a malfunction that is
not caused by the GPS hardware.
Before contacting your dealer, please contact the Navilock support. They will
provide you with help in a fast and easy manner, and help avoid unnecessary
replacement.
