Navigon PNA 5100 Скачать руководство пользователя страница 45

Страница: 45 / 172

Basic Operations

Viewing device status

December 2008

NAVIGON 5100 max User’s Guide

Version 2.1

NAVIGON, INC.

Viewing device status

Symbols located at the top right of the screen are used to display information.

GPS

The GPS symbol can show the following GPS reception status:

No Symbol

The built-in GPS receiver is not operational. Contact customer
service if the problem persists.

No Signal

Data is being received from less than three satellites. Position
cannot be calculated.

GPS Ready

Data is being received from at least three satellites. Position can
be calculated.

Power

The Power symbol can display the following conditions of the built-in battery:

The device is powered by an external power source. The battery is charging.

The device is powered by its internal battery. Battery is fully charged.

The device is powered by its internal battery. Battery charge is sufficient.

The device is powered by its internal battery. Battery charge is low.

For more information, see “About GPS navigation” on page 6.

For more information on recharging your device, see “Charging the battery” on
page 10.

Caution!

When the No Battery (

) icon displays, the battery has no power

remaining. The device will soon turn off. S

ee “Charging the battery” on page 10.

Caution!

Do not attempt to replace the battery. For problems related to the battery, con-

tact NAVIGON Customer Support.

Содержание PNA 5100













































































































































































Результаты поиска

Содержание PNA 5100

Отзывы:

Похожие инструкции для PNA 5100

Бренды по названию

Популярные бренды

Navigon PNA 5100, Руководство пользователя

Результаты поиска

Содержание PNA 5100

Отзывы:

Похожие инструкции для PNA 5100

Бренды по названию

Популярные бренды