9
EN
ENGLISH
15. INSTALLING THE FRONT SHELF
Parts Required:
1 x Front Shelf
(#38)
Installation:
• Place the Front Shelf on the Front Shelf Support Brackets. Note illustration
15A as unfolded Front Shelf.
• Note illustration 15B as folded Front Shelf.
• Front Shelf can also be placed on the Bottom Support Plates and be used as
Bottom Plate. Note illustration 15C.
16. INSTALLING THE SIDE SHELF
Parts Required:
1 x Side Shelf
(#14)
Installation:
• Loosen the two pre-installed screws from the side of the Main Barrel. Hook
up the Side Shelf on the screws first then secure the two pre-loosened screws
into place.
• From underneath, secure the Side Shelf to the side panel of the Main Barrel
using two screws, washers, and locking washers.
17. INSTALLING THE COOKING COMPONENTS
Parts Required:
1 x Flame Broiler Main Plate
(#4)
1 x Flame Broiler Slider
(#3)
1 x Flame Broiler Adjusting Bar
(#5)
1 x Flame Broiler Adjusting Bar Handle
(#6)
1 x Smoker Adjusting Bar
(#13)
3 x Heat Tent
(#7)
4 x Porcelain-Coated Casted-Iron Cooking Grids
(#2)
2 x Porcelain-Coated Upper Cooking Rack
(#1)
Installation:
• Insert the Flame Broiler Main Plate into the main grill. Rest the Flame Broiler
Main Plate on the built-in ledge (on the inside right) of the Main Grill
that directs grease towards the grease bucket spout. Slide the entire piece to
34
MOUNTING THE FRONT SHELF
34
MOUNTING THE FRONT SHELF
15A
15B
38
Ax4 Bx4 Cx4
NSTALLING THE FRONT SHELF BRACKETS
Attach one front shelf bracket to the
front of the grill barrel by using two
screws.
Install each screw half-way, then tighten
completely when all two screws are mounted
and aligned properly.
Repeat the same installation for the other
front shelf bracket.
MOUNTING THE FRONT SHELF
15C
16
14
17A
4
17B
4
3
