10
EN
ENGLISH
the left side, and the two slots on the Flame Broiler Main Plate will fit into the
rounded ledge above the burn pot. It will sit slightly at a downward angle.
Note illustration 17A.
IMPORTANT: If the Main Plate is resting on the base of the Barrel, it is
installed incorrectly. Poor installation may result in damage to your Main
Grill Barrel.
• Place the Flame Broiler Slider on top of the Flame Broiler Main Plate covering
the slotted openings. Ensure the raised tab is on the left and the two pins
at the bottom of the Flame Broiler Slider place into the holes of the Flame
Broiler Main Plate. To Easily adjust for direct or indirect flame when cooking.
Both Flame Broiler parts are lightly coated with oil to avoid rusting when
shipped. Note illustration 17B.
NOTE: When the flame broiler slider is open, and direct flame is used while
cooking, do not leave the grill unattended for any period of time.
• Insert the Flame Broiler Adjusting Bar through the opening hole on the left
side of the Main Barrel. Add the Flame Broiler Adjusting Bar Handle on the
end outside the Barrel. Next, slide the notched end of the Adjusting Bar into
the locking tab on the Flame Broiler Slider, giving you adjustable access to the
Flame Broiler Slider on the Main Plate. Note illustration 17C.
• Screw in the Smoke Adjusting Bar and tighten it. Should slide from front to
back smoothly. Note illustration 17D.
• Place the three Heat Tents on the top of the burners. Place the Cooking Grids,
side-by-side, on the grid ledge inside the Main Grill. Place the Upper Cooking
Rack on the upper ledge inside the Main Grill. The Cooking Rack will lock into
place. Note illustration 17E.
NOTE: To maintain the searing and grilling performance of your cooking
grids, regular care and maintenance Is required. See Owner's Manual.
18. INSTALLING GREASE BUCKET
Parts Required:
1 x Grease Tray
(#17)
1 x Grease Bucket Liner
(#18)
1 x Grease Bucket
(#19)
Installation:
• Slide the Grease Tray into the bottom of the barrel. Note illustration 18A.
• Insert the Grease Bucket Liner inside the Grease Bucket. Place the Grease
Bucket on the spout hook on the underside of the grill. Ensure it is level to
avoid grease spills. Note illustration 18B.
PLACING THE GREASE BUCKET/TRAY
Slide the grease tray into the bottom of the barrel.
Place the grease bucket on the spout hook on the bottom of the main barrel.
Ensure it is level to avoid grease spills.
18
19
1
2
INSTALLING THE COOKING COMPONENTS
Place the cooking grids, side-by-side, on the grid ledge inside the main grill. Place the upper
cooking rack on the upper ledge inside the main grill. The cooking rack will lock into place.
IMPORTANT: To maintain optimal searing and grilling performance of your cooking grids,
regular care and maintenance is required.
17
18A
18B
17C
A
C
B
5
17E
1
1
2
2
7
INSTALLING THE COOKING COMPONENTS
Screw the smoke adjusting bar per the picture, and tighten
it. And try if it can slide from front to back smoothly.
17D
13
C
B
6
5
