NAVCAM-FHDGPS
USER MANUAL
8
NavCam-FHDGPS Manual Ver 2.1 09/2013
Available Video Options:
Option
Selection Options
Option Description
Resolution
Resolution
Select:
FHD 1920x1080
HD 1440x1080
HD 1280 x 720 50fps
HD 1280 x 720 30fps
Full HD 1920x1080 gives higher image
quality, less record time
Loop recording
Select[Off, 1 or 2 or 3 or 5 or
10 Minute]
Select the time for each recording
segment. For example, if set to “1”, then
each video recorded is 1minute long. If set
to “off”, then the camera will record until
the SD card is full.
Exposure
+2.0,5/3,+4/3,+1.0,+2/3,+1/3
,+0.0,-1/3,-2/3,-1.0,-4/3,
-5/3,-2.0
Use this setting to adjust for varying
lighting conditions. U0/0 is suitable
for most environments
Motion
detection
Select [On/Off]
When set to “On”, the CRASHCAM-
FHDGPS will begin recording when it
senses movement. For example, if the
CRASHCAM-FHDGPS is left on, the camera
will begin recording if the image is
disrupted (like a person walking by).
Record Audio
Select [On/Off]
Turns the built-in microphone On or Off.
For privacy this can be turned off so that
no audio is recorded.
Date stamp
Select [On/Off]
Records the set date and time onto the
video file (date/time is set in the setup
options).
G-Sensor
Select [Off/Low/Mid/ High]
Select the level of sensitivity for the auto
bump file record feature. “Low” would
mean a BIG bump / knock / shock would
trigger the auto save feature. “High”
would mean a relatively small knock /
bump would trigger auto save.
