NAVCAM-FHDGPS
USER MANUAL
5
NavCam-FHDGPS Manual Ver 2.1 09/2013
What’s in the box
Navig8r Crash Cam FHDGPS, Windscreen Suction-cup Mount with built in GPS Antenna, 1 x
1.2m Micro USB Cable, 1 x 12v DC Car Charger, 1 x HDMI cable, User Manual
FEATURES AND OPERATION
Memory Card required for operation
The CRASHCAM-FHDGPS requires a Micro SD card (not included) to record video/image
content. (See page 11 for a table showing SD card capacity and the amount of video content
able to be stored). For optimal performance, we recommend using a Class 6or 10 Micro SD
card to ensure fast data transfer rates (Class 4 cards will still work however may result in
slower transfer rates).
Power ON / OFF function (Auto ON / OFF)
When connected to the 12v DC socket (cigarette socket) of your car, the CRASHCAM-
FHDGPS will turn ON and OFF automatically and start recording when the car’s ignition is
turned ON and OFF. If the CRASHCAM-FHDGPS does not turn off immediately it means the
device is completing the file save process before turning off (usually only a few seconds).
The CRASHCAM-FHDGPS can manually be turned ON or OFF by pressing and holding the
power button on the bottom of the device. To turn OFF, press and hold the same power
button.
Note: If the 12v socket is “constant on” (in some European vehicles), then the CRASHCAM-
FHDGPS will need to be turned on/off manually by the power button or by removing the 12v
plug.
While connected to the car’s 12V DC socket (or from a powered USB hub or PC USB port)
the LED indicator will glow red (battery is charging) and will be off once the battery is fully
Whilst connected to the car’s 12V DC socket (or from a powered USB hub or PC USB port)
the LED indicator will glow red (battery is charging) and will be off once the battery is full.
Note – the device’s battery will not charge if connected to a PC USB port.
Installation on the car windscreen
The CRASHCAM-FHDGPS works best when mounted centrally and high up on the
windscreen (typically behind or close to the rear vision mirror). Use the supplied windscreen
suction mount (with built in GPS antenna) to affix the CRASHCAM-FHDGPS to the
windscreen by turning the square GPS antenna part to lock down the suction mount. Then
plug the 3.5mm plug to the Crashcam to enable the GPS antenna. Adjust the mount /
camera until you can see a clear view of the road ahead on the device LCD.
