5
Operating your wristband
This wrist band does not have an On/Off button. It simply enters hibernate
mode if the wrist band button has not been pressed after 6 seconds.
The wrist band has two different modes, indicated by the flashing icons at
the bottom of the wrist band screen.
Toggle between each screen by
pressing and holding the wrist band button
.
Non flashing icons
(main screen)
This is a perpetual counter that shows total combined data and steps
When toggling between screens this mode
ALWAYS
shows: Current time
and battery life,
total
steps,
total
distance and
total
calories burnt.
Flashing Icons
(Lap timer screen)
This screen can display individual lap times for example, by resetting a
separate counter back to zero (without changing the master screen data.)
When toggling between screens this mode shows: duration of activity, steps,
distance and calories.
Note: By changing modes you will also zero off the previously saved lap data
of the lap timer screen.
