Evaluation Board of ML8088s Receiver
Operating Manual 2.0
12
Navia G GPS Application
Navia GLONASS + GPS Application is intended for working with ML8088s receiver
evaluation board (executable file navia_viewer.exe). This application allows getting familiar
with the receiver operation, adjusting necessary parameters and testing the receiver performance.
This document describes the application
Navia GLONASS + GPS version 1.10.0.342
(hereinafter Navia viewer). The application main window appearance is presented in Fig. 7.
Fig. 7. Navia G GPS Application Main Window.
To ensure the application operation
you have to
install .NET Framework
4.0 Client Profile
(or
its
full
version
.NET
Framework
4.0).
This
software
can
be
downloaded
from
Microsoft
website
You
also
have
to
install
USB-COM
converter
VCP
drivers
by
FTDI.
The
required
drivers
can be found at the company’s website at the address
http://www.ftdichip.com/Drivers/VCP.htm
where you have to select the driver matching the operation system of the user’s computer.
Further
this
document
describes
the
interaction
of
Navia
viewer
application
and
the
evaluation
board
in
the
state
“all
jumpers
are
in
position
OPERATION
according
to Table
3”.
The receiver embedded software is in standard factory release unless otherwise specified.
The application
Navia G
GPS
has an embedded system of pop-up prompts and
an extensive
Support
section.
The prompts are displayed when the cursor is pointed at an area
which
can
be
manipulated
by
the
user.
It
should
be
noted
that
a
number
of
functions
intended
mainly for the application servicing are not supported by prompts.
The
document
describes
the
application
basic
operation
modes
needed
to
most
users.
The
application’s functionality not described in the manual are intended mainly for investigating the
module's operational characteristics.
You can inquire the developer on the application functions
not described in this manual by email
.