07
08
EN
EN
4. Assembly
1. Erect the vertical column to a complete upright
position, lift up the safety lock and push the folding
wrench inward tightly. Then open the kickstand.
3. Follow the number order as illustrated to pre-tighten
the four screws with the included Allen key. Make sure
the handlebar is correctly installed and then tighten the
screws thoroughly.
2. Install the handlebar onto the stem, and make sure
to install the handlebar in the correct direction.
1
3
2
1
2
3
4
Tips: You need to buy AirTag separately.
Install AirTag holder
1
2
Preload the AirTag into the AirTag holder according to the pictures.
Hold the stem, press the safety lock, pull out the quick release lever, fold the stem, and insert the AirTag
holder into the base.
3
Erect the vertical stem to a complete upright position, lift up the safety lock and push the folding wrench
inward tightly.