7 Assembly
8 Deployment Steps
11
12
c. Hold the stem back up, lift the folding safety lock, and push the quick-release lever inward to the end.
a. Open the kickstand.
b. Hold the stem up until it is completely in an upright position. Lift the folding safety lock, and push the quick-release lever
inward to the end.
c. Install the handlebar onto the stem, and make sure to install the handlebar in the correct direction.
d. Pre-tighten the six screws with the included wrench. Make sure the handlebar is correctly installed and then tighten the
screws thoroughly.
Safety tips: before each ride, please check to ensure that the screw, folding safety lock and other link parts
are not loose.
Safety tips: when lifting the front part of the N40 scooter, do not put your hand between the joints.
a. Open the kickstand.
a
b
c
d
b. Pull the buckle upwards to release it from the
hook.
