17
Buick Encore 2013-2016
Testing and Settings
STEP 3
STEP 4
Apple CarPlay/Android Auto (Auto ON Mode)
only set it to ON if you do not plan
to use HDMI or video inputs
• On the supplied joystick remote (Fig. 1), press and hold the back button for 3-5 seconds. The
interface should emit a chirp and the interface menu (Fig. 2) should appear on the screen.
Fig. 2
Fig. 1
Adjust camera inputs if you haven’t done so already during the initial configuration of the interface.
•
Press menu button on the remote control to reveal
NavTool menu bar.
•
Rotate joystick to the right to highlight menu option.
•
The menu option is the last icon on the right.
•
Then press enter on the joystick remote to enter settings.
•
Rotate joystick remote to highlight the settings gear.
•
The settings gear is the top icon.
•
Then press enter on the joystick remote to enter settings.
•
Rotate joystick to highlight Manual Activation Wire as
Reverse T12V.
•
Then press enter button on the joystick remote to change
the setting to OFF, once the red dot is set to OFF (image
shown on the left), rotate the joystick to highlight SAVE
button and press the enter button on the joystick remote to
SAVE.
Step: 1
Step: 2
Step: 3
