14
Buick Encore 2013-2016
Installation Instructions
STEP 8
Plug in main interface (Part # NAVTOOL6.0-AR2-NBT) into the universal wiring harness
(Part # NT-WHNT6). See quick connection guide on page 7.
Click
Factory Wire
NavTool Supplied Cable
(Part # NT-GMQUAD-BLU)
NavTool Interface
(Part # NAVTOOL6.0-AR2-NBT)
NavTool Supplied Harness
(Part # NT-WHNT6)
Back of Car Radio
Lef
t C
amer
a I
nput/
Video I
nput 3
Righ
t C
amer
a I
nput/
Video I
nput 4
Fr
on
t C
amer
a I
nput/
Video I
nput 2
Rear C
amer
a I
nput/
Video I
nput 1
Joystick Receiver Harness
(Part # NT-JYRB1)
Joystick Receiver
(Part # NT-JYCV1)
• The product installation is now complete.
• Do not reassemble the vehicle until testing is fully complete. Only after you have tested that
everything is working can you reassemble the car.
• If you are adding side or front cameras, install them and plug them into the appropriate camera
RCAs.
• If you are installing any HDMI or streaming devices, connect it to the HDMI port of the NavTool.
See Page 13
