15
Buick Encore 2013-2016
Installation Instructions
STEP 9
Plug the NavTool supplied AUX Activator (Part # NT-AUX-ACT) into vehicle’s 3.5mm AUX jack.
See picture below.
STEP 10
After the interface is installed and you activate the NavTool, if your screen is blinking or you see a
NavTool image for a second and it goes to a black screen, you must cut a wire on the harness.
This is a front view of the connector
NOT
wire side
Cut pin 10
AUX Input Located
Inside Center Console
Or Under the Radio
NavTool supplied AUX Activator
(Part # NT-AUX-ACT)
